Komatsu — OTHER TROUBLE

. OPERATION TROUBLESHOOTING 3 - 149 CHASSIS ( ) : Always contact your Komatsu distributor when dealing with these items. In cases of abnormalities or causes which are not listed below, contact your Komatsu distributor for repairs. Problem Main causes Remedy When brake pedal is depressed, machine does not stop ( Check, adjust, repair) Track comes off Track too loose Adjust track tension, see WHEN REQUIRED Abnormal wear of sprocket Blade,ripper lifting speed is slow or they do not move Add oil to specified level. See EVERY 250 HOURS SERVICE.

Set to FREE position Machine does not turn when steering is operated Set to FREE position ( Check, repair) ( Check, replace) ( Check, replace) Transmission oil pressure does not rise ( Check, replace) Add oil to specified level. For details,See CHECKS BEFORE STARTING. Clean. For details, see EVERY 1000 HOURS SERVICE. Lack of drawbar pull (travel speed does not rise) Lack of engine horsepower See ENGINE Pickup of travel speed is slow Power train oil temperature is low Lack of engine horsepower Carry out warming-up operation See ENGINE Lack of oil in power train case Add oil to specified level.

See Transmission oil pressure does not rise Parking brake is at LOCK position Set to FREE position Machine does not travel in straight line Defective adjustment of HSS controller Abnormality in HSS pump ( Adjust) ( Check, replace) Torque converter overheats (Red range of power train oil temperature gauge lights up) Add oil to specified level. See CHECK BEFORE STARTING See "Transmission oil pressure does not rise" above Shift down one gear, or reduce load and raise speed during operation