. MAINTENANCE GUIDES TO MAINTENANCE KOMATSU GENUINE OILS: Use Komatsu genuine oils and grease. Choose oils and grease with proper viscosities specified for ambient temperature. 4 - 2 GUIDES TO MAINTENANCE Do not perform any i nspection and maintenance opera tion that is not fou Stop the machine on flat hard ground when performing inspections and m aintenance CHECK SERVICE ME TER Check the service m eter reading every day to see if the ti me has come for a ny necessary maintenance maintenance to be performed. KOMATSU GENUINE REPLACEMENT PARTS : Use Komatsu genui ne parts specified in the Parts Boo k as replacement p ALWAYS USE CLEA N WASHER FLUID:
Use automobile wind ow washer fluid, and be careful no t to let any dirt ge CLEAN OIL AND GR EASE: Use clean oil and gr ease. Also, keep the containers of t he oil and grease clean. Keep foreign materials away from oil and grease. CHECK FOREIGN MATERIAL IN DRAINED OI L: After oil is changed o r filters are replaced, check the old o il and filters for me tal particles and for eign materials . If l arge quantity of metal pa suitable action. rticles or foreign materials are found, always report to the person in charge, and carry out arry FUEL STRAINER: If your machine is eq uipped with a fuel strainer, do not remove it while fu WELDING INSTRUCT IONS: e ignition switch. than 200 V continuously.
g cable within 1 m (3.3 ft) of the area to be welded. If grounding cable is connected near ectors, etc., the instruments may malfunction. ng happens to come between the part being welded and grounding point, change the the avoid such parts. ea around the work equipment pins or the hydraulic cylinders as the grounding point. Turn off the engin Do not apply more Connect groundin g cable within 1 m (3.3 instruments, conn ectors, etc., the instruments may m If a seal or beari grounding point to Do not use the ar ea around the work equipment pins or the hydraulic c ylinders as the gro unding point. OBJECTS IN YOUR P OCKETS:
When opening ins pection windows or the oil filler po rt of the tank to ca rry out inspection, be careful not to drop nuts, bolts, or tool If such things are lead to failure. If y s inside the machine. dropped inside the machine, it may cause damage an d/or malfunction of the machine, an d will ou drop anything inside the machi ne, always remov e it immediately. r inspection. Do not put unnec essary things in your pockets. Car ry only things whic h are necessary fo