Komatsu — HANDLING OIL, FUEL, COOLANT, AND PERFORMING OIL CLINIC

. MAINTENANCE OUTLINES OF SERVICE OUTLINES OF SERVICE HANDLING OIL, FUEL, COOLANT, AND PERFORMING OIL CLINIC 4 - 5 OIL Oil is used in the engine and work eq pressure), and deteriorates with use. Always use oil that matches the grade an Even if the oil is not dirty, always change uipment under extremely severe conditions (high temperature, high Always use oil that matches the grade an d temperature for use given in the Operation and Maintenanc e Manual. Even if the oil is not dirty, always change the oil after the specified interval. ody, so always be careful when handling it to prevent any impurities ting in. are caused by the entry of such impurities. ies get in when storing or adding oil.

ds. th causes of problems. Oil corresponds to blood in the human b (water, metal particles, dirt, etc.) from get The majority of problems with machines Take particular care not to let any impurit Never mix oils of different grades or bran Always add the specified amount of oil. Having too much oil or too little oil are bo If the oil in the work equipment is not cle ar, there is probably water or air getting into the circuit. I n such cases, please contact your Komatsu distributor. e related filters at the same time. When changing the oil, always replace th We recommend you to have an analysis made of the oil periodically to check the condition of the machine.

For those who wish to use this service, pleas e contact your Komatsu distributor. At the time of shipping from the factory, S AE1OWCD is used for hydraulic type of oil. When HO46-hydrauli c oil is going to be used, change specified am ount of oil (whole amount). The hydraulic oil that is not recommended by Komatsu can cause clogging of oil filt er, so do not use it. The portion of the oil that remains in the piping or gh it will be mixed into new oil. pipin g or cylinders will not be a problem even thou FUEL and if fuel containing water or dirt is used, it cannot work properly. get in when storing or adding fuel. ation and Maintenance Manual.

The fuel pump is a precision instrument, and if fuel containing water or dirt is used, it cannot wor k properly. Be extremely careful not to let impurities Always use the fuel specified in the Oper Fuel may congeal depending on the temp erature when it is used (particularly in low temperature b elow -15° C (5 °F)). It is necessary to use the fuel that is suitable for the temperature. To prevent the moisture in the air from co ndensing and forming water inside the fuel tank, always f ill the fuel t ank after completing the day's work. Before starting the engine, or when 10 mi nutes have passed after adding fuel, drain the sediment and w ater f rom the fuel tank.

If the engine runs out of fuel, or if the filte rs have been replaced, it is necessary to bleed the air fr om t he circuit.