. MAINTENANCE OUTLINES OF SERVICE coolant. GREASE 4 - 6 COOLAN River wa ter contains large amount of calcium and other impurities, so if it is used , scale will stick to th e engine and radiator, and this will cause defectiv e heat exchange and overheati Do not u se water that is not suitable When us ing antifreeze, always obse rve the precautions given in the Operation and M aintenance Manu Komatsu machines are supplied wit h Komatsu specified antifreeze i n the coola nt whe n the machin e is s hipped. This anti freeze is also effective in pr eventing corrosion of the coolin g system. Replace the antifreeze periodically. For details, see "CLEAN INSID E OF COOLING SYSTEM (P AGE 4-20)".
Antifreez e is flammable, so be extre mely careful not to expose it to flame or fir The prop er mixing proportion of the antifreeze depends on the amb ient temperature. For the mixin g proportion, see "CL EAN INSIDE OF COOLING SYSTEM (PAGE 4-20)". If the en gine overheats, wait for the engine to cool before adding co If the coo lant level is low, it will caus e overheating and will also caus e problems with c orrosion from the a ir in the Grease i s used to prevent twisting a The nipp les not included in the MAIN TENANCE section are nipples used when overhauling, so they do n ot need grease.
If any pa rt becomes stiff or generate s noise after being used for a l ong time, g rease i Always wipe off all of the old grease that is pushed out when greasi Be partic ularly careful to wipe off the old grease in places where sa nd or dirt st icking i n the grease would cause wear of t