Komatsu — CHECK TRACK TENSION

. MAINTENANCE SERVICE PROCEDURE MAINTENANCE SERVICE PROCEDURE If the WHEN LOOSENING TENSION WARNING the procedure given below. If the track tension is not 4 - 26 5. Contin pump come mm. tension is still loose , the pin an d bushing are excessively so they must be eit her turned o r replaced . Please conta Komat su distributo It is extreme ly dangerous to release t he grease b y any method e xcep relieved by t his procedure , please con tact your Ko matsu distribut or. 1. Remov e 2 bolts (3) , then remo ve cover ( NOTICE The safet y label is stuc k on the ba ck of cover (2), so be carefu l not damage t he safety labe When rem oving cover ( 2), be carefu l not to let a ny dirt or soil g et in.

2. Loosen lubricator(1 ) gradually to release the grease. . 3. Turn lu bricator(1) a maximum of one turn 4. If the g rease does not come o ut smoothl y, move the m achine f orwards and backwards 5. Tighte n lubricator(1 ). 6. To che ck tha t the c orrect tens ion has be en achieved, m ove th e machine backwards a 7. Check the track ten sion again , and if the tension is not correct, adjus t it again.