Komatsu — REPLACE POWER TRAIN OIL FILTER ELEMENT

. MAINTENANCE SERVICE PROCEDURE REPLACE POWER TRAIN OIL FILTER ELEMENT 4 - 56 1. Open t he engine side cover at the left side of th remove bolt (1) th en open cove the utsid bottom hinged as a pivot machine, using the 2. Remov e mountin g bolt (4) of filte r (3), th en remove cover (5). 3. Take o ut element 4. Clean t he remove d parts and the inside of the case, then install a new element. Use Ko matsu gen uine 5. Close c over (2) an d tighten bolt ( 1), then clos e the e ngine side cover a t the left si de of the machine.