. MAINTENANCE SERVICE PROCEDURE CHANGE OIL IN HYDRAULIC TANK, REPLACE HYDRAURIC OIL FILTER ELEMENT WARNING cover. 4 - 67 EVERY 2000 HOURS SERVIC Maintenance for ev ery 250, 500 , and 1000 hours sho uld be performed at the sam The oil is at high temp erature immediately after t he machine has been operated. Wait for the oil to cool d own before cha nging the oil. When removing the o il filler cap, tur n it sl owly to release th e internal pressure, then remov e it carefully O il replacement amount: 87 li ters ( 22.99 US 1. Lower the blad e and the ripper c ompletely to the ground, and stop the engin e. Turn the cap of oil filler port to release the inte rnal pressure , the n remove the ca 2.
Remove plug ( 1) at the bottom o f the hydraulic oosen drain valve (2), and drain the oil. After draining th e oil, t ighten drain valve (2) and plug (1). Wh en loosening an d drain valve (2), be careful not to get oil o ver yourse 3. Tighten mounti ng bolts (5) o f inspection cover (4) of the cover at tank,