Komatsu — CHECK ALTERNATOR, STARTING MOTOR

. MAINTENANCE SERVICE PROCEDURE MAINTENANCE SERVICE PROCEDURE at the specified details, see "CHECK OIL LEVEL IN flushing oil, then dry 4. Replace the breather O-ring with a new part, coat with engine oil, then install. 4 - 68 4. remove cover ( 5. Remove drain p lug (3) that can be seen fr om unde r the fender and d rain the o il between ther e and the o il filter c ase. When loosening drain plug (3), be car eful not to get oil ov er yourself. 6. Remove eleme 7. Clea n the insid e of the case an d removed Replace a new filter. Always use Komat su genui ne filter. 8. Replace drain p 9. Close filter cov er (8), then tight en bolts (7 ). 10.

Refill the specif ied quantity of e ngine oil t hrough oi l fille r (F). 11. After filling with oil, check tha t the oil is HYDRAULIC T ANK, ADD OIL (PAGE 3-7 level. For CLEAN ENGINE BREATHER ELEME 1. Wipe r of all the dirt from aroun d the breat 2. Remove breath 3. Rinse of the br with compresse CHECK ALTERNATOR, STARTING MOTOR The brushes mat be worn or the bea ring may h ave run o ut of grease , contact your Komatsu distributor for inspection and repairs. ted frequently, have this inspection carried out every 1000 hours. f th e engine is star ted frequently, h ave this in spection carried out every 1000