Komatsu — CHANGE OIL IN DAMPER CASE, CLEAN DAMPER BREATHER

. MAINTENANCE SERVICE PROCEDURE CHANGE OIL IN DAMPER CASE, CLEAN DAMPER BREATHER WARNING 4 - 69 The oi l is at high temperatu re immediately af ter the machine has been operated.Wait for the oil to c ool down before carrying out maintenance The undercover i s heavy. D o not g o directly u nder the cover when opening or closing it. When remov ing bolts (4), carry out the operation a t the rear of the point i mmediately under t he cove r so that it is possible to escape at any Refill capacity: 1.5 liters ( 0.40 US 1. Ope n the engine side c over a t the left o f the m achine; yo u can see gaug e (G 2. Remove the u ndercove r (2) a t the botto m rear of the chassis as follows.

1) Remove 2 bolts (3) at the front of the chassis. 2) Hold down cover (1) and remove 2 bolts (4) at the machine rear end gradually. (Rainwateror other accumulated water may flow out, so be careful.) follows. 1) Remove 2 bolts (3) at th e fron t of t he cha 2) Hold dow n cover (1 ) and remove 2 bolts (4 ) at the machine ear end g radually. (Rainwate ror o ther ac cumulated water may flow out, so b e careful.)