Komatsu — PRECAUTIONS WHEN TRAVELING

. SAFETY PRECAUTIONS FOR OPERATION PRECAUTIONS WHEN TRAVELING 2 - 22 Never turn the e stops wh en the machine is tra veling. When the engine is off, it is impos sible to operate the steering. Apply the brakes an d stop the machine i mmediately, if the engine stops. When travelin g on flat ground, keep the work equipmen t 40 to 50 cm (16 to 20 in) high above the ground When travelin g on rough ground, travel at low speed and operate the st eering suddenly. There is danger that the m may turn over . The work equipment may hit the ground and cause the machine to lose its balance, or may dam machine or st Avoid travelin g over obstacles when possible. If the m achine t close el over ide.

a safe o avoid hat the achine. elevant has to travel o ver an obstacle, keep the work equipmen to the groun d and travel at low speed. Never trav obstacles whi ch make the machine tilt strongly to one s When travelin g or carrying out operations, always keep distance from people, structures, or other machines t ontact with them. g over bridges or structures, check first t coming into c When passin structure is str ong enough to support the weight of the m When travelin g on public roads, check first with the r d follow their instructions.

authorities an When operatin g in tunnels, under bridges, under electric wires, or other places where the height is limited, o perate slowly and be extremely careful not to let the work equi pment hit anything. Do not approa ch the edge of a cliff carelessly. When dr opping soil over a cliff for banking or r eclamation , leave soil of one sco op at the edge of the cliff and push it with the next scoop. When the mac hine passes over the top of a hill or when a load is dumped over a cliff, the load is s uddenly re duced, and there is d anger that the travel speed rises suddenly . To prevent this, lower the travel spe ed.

If the machine moves with only either side of the blade l oaded, its tail may swing. Take care.