. SAFETY PRECAUTIONS FOR MAINTENANCE NOISE 2 - 33 When carrying out mainten ance of the engine and you ar e exposed to noise for long pe riods of time, wear ear covers or ear plugs while working If t he noise from the machi ne is too loud, it may cause t emporary or permanent hea PRECAUTIONS WHEN USI NG HAMMER s may fly out or metal particles may be o serious injury. Always do as follows. as pins, bucket teeth, cutting edges, or hammer, there is a hazard that pieces d cause injury. Always wear safety ket teeth, there is a hazard that broken ng and injure people in the surrounding there is no one in the surroundingarea.
When using a hammer, pin s may fly out or metal particl es may be scattered. This may lead t o serious injury. Always do a s follows If hard metal parts such as pins, bucket teeth, cutting edges, or bearings are hit with a hammer, there is a hazard that pieces d cause injury. Always wear safety might be scattered an goggles and gloves. When hitting pins or buc ket teeth, there is a hazard th at broken pieces might be sent flyi ng and injure people in the su rrounding area. Always check that there is no one in the surroun dingarea There is a hazard that t he pin hit with strong force ma y fly out and injure people in the surrounding area.
REPAIR WELDING Welding operations must a lways be carried out by a quali fied weld er and in a place eq uipped with proper equipment There is a hazard of gas, fi re, or electrocution when carr ying out w elding, so never all ow any unqualified personne to carry out welding. REMOVING BATTERY TER MINAL When repairing the electric al system or when carrying o ut electric al welding, remove t he negative (-) terminal of the battery to prevent the flow of current. PRECAUTIONS WHEN USING HIGH-PRESSURE GREASE TO ADJUST TRACK TENSIO Grease is pumped into the track tension adjustme nt system under high pressure.
If t he specified procedure for ma intenance is not followed when ma king adjustment, grease drai n valve (1) may fly out and cause s erious injury or damage. When loosening grease drain valve (1) to loosen trac k tension never loosen it more tha n one turn. In doing so, loosen the valve slowly. Never put your face, ha nds, feet, or any other part of your body directly in front of greas