Komatsu — FRONT PANEL

. OPERATION EXPLANATION OF COMPONENTS METER GROUP D(1) D(2) D(3) D(4) Engine cooling water temperature gauge Power train oil temperature gauge Hydraulic oil temperature gauge Fuel level gauge D(5) D(6) Engine preheating pilot lamp Display panel A (Speed range display, engine speed) Display panel B (multi-information) D(7) ENGINE COOLING WATER TEMPERATURE GAUGE Gauge (1) indicates temperature of the engine coolant. If the temperature is normal during operation, green range (B) will light. If red range (C) lights during operation, move the fuel control dial to lower engine speed tp approx. 3/4 of the full speed, and run until the coolant temperature enters green range (B).

During operation, if red range (C) lights up, the engine water temperature monitor flashes, and the alarm buzzer sounds, stop the machine, run the engine at low idling, and wait for the water temperature to go down to green range (B) . (A): White range (B): Green range (C): Red range NOTICE If the coolant temperature gauge often enters red range (C), check the radiator for clogging. 3 - 13 NOTICE When the engine is stopped, turn that the starting switch t o the ON position a nd check that the gauge or monitor for the e ngine water temperature gauge, power train oil t emperature gaug e, and fuel gauge li ght up. If they do not light up, please contact you r Komatsu distrib utor for repairs.