. OPERATION EXPLANATION OF COMPONENTS 3 - 14 POWER TRAIN OIL TEMPERATURE GAUG E utlet oil temperature. Gauge (2) indic ates the torque converter o utlet oil tempera If the temperat ure is normal during operati on, green range (B) will light. If red range (C) lights up during operation,m ove the fuel con trol dial to lower engine speed to approx. 3/4 of th e full speed, red uce the load and run u ntil the oil temperature ente rs green range ( B). If red range (C lamp flashes, a ) lights up, the power train nd the alarm buzzer sound oil temperature s during operatio caution n, stop the machine, ru down to green n at low idling, and wait for the oil temperature to go range (B). e ge (A):
White rang (B): Green ran (C): Red range NOTICE In cases where t he power train oil temperature gauge tends to e nter red range (C), we rec ommend that you lower the sp eed range by one range in order to reduce t he load on the power train duri ng operations. HYDRAULIC OIL TEMPERATURE GAUGE erature. Gauge (3) indic ates the hydraulic oil temp If the temperat ure is normal during operati on, green range (B) will light. If the red range (C) lights up during operatio n, move the fuel control lever to lower t he engine speed to appro x. 3/4 of the full speed, reduce the load and run until the oil tempe rature enters the green range (B). (A): White rang e ge (B): Green ran (C):
Red range FUEL LEVEL G AUGE level in the fuel tank. Gauge (4) fuel During normal operation, the green range ( B) should be ligh ted up. If red range (A) lights up during operation, add fuel immedi ately. If this is not done , the engine speed will bec ome irrgular or a n error display will be shown on the monitor. ge (A): Red range (B): Green ran REMARK The display is not proportional to the am ount of fuel rem aining. If only the r ed range (A) lights up, ther al) of fuel remaining. e is less than 60 liters (15.85 US g