Deutz — 4.3.1 SETTING THE TRACTOR VERSION AND SERIAL NUMBER

4. PUTTING THE TRACTOR INTO SERVICE 4.3 RENEWAL OF THE TRANSMISSION CONTROL UNIT 5 - Select “END-OF-LINE PROGRAMMING” from the “CONTROL” menu .. 6 - Select “CONFIG” 7 - Use the “PAGE UP” or “PAGE DOWN” functions to find the identification number of the vehicle corresponding to the first four digits of the serial number, then press Enter to confirm the value and type the remaining four num- bers to complete the serial number of the machine (in the example illustrated, the version is 8092 and the serial number 0807). 8 - Proceed to calibrate the clutch pedal position sensor and the main clutch as described in the following chap- ters .. 20-26