4. PUTTING THE TRACTOR INTO SERVICE 4.3 RENEWAL OF THE TRANSMISSION CONTROL UNIT 4.3.2 CALIBRATION OF THE CLUTCH PEDAL POSITION SENSOR 1 - Connect a portable computer with the EDS program installed (for details see «Connection of a portable computer with “EDS” software to the transmission control unit»). 2 - Turn the starter key to the (ON) position and start the EDS program. 3 - From the introductory menu, start the transmission diagnosis program by pressing key “1” and selecting option “2”.. 4 - From the main menu, select “DEST45” on the “CONTROL” menu. 20-27