Deutz — 5.2.4 ANALYSIS OF ALARMS

5. ALARMS 5.2 LIST OF TRANSMISSION CONTROL UNIT ALARMS 5.2.4 ANALYSIS OF ALARMS ALARM N° 11 DESCRIPTION The control unit detects errors in the main clutch calibration values. ECU RESPONSE The control unit does not limit the operation of the transmission, but sets the contact pressure on the main clutch pedal to the default value (99.99, corresponding to the value registering at the end of the engagement ramp). CHECK Perform the main clutch calibration procedure. Clear all alarms, turn the starter key first to “O” (OFF) and then back to the “I” (ON) position again, and if the alarm is still present, the control unit must be renewed. 20-84