Deutz — 5.2.4 ANALYSIS OF ALARMS

5. ALARMS 5.2 LIST OF TRANSMISSION CONTROL UNIT ALARMS ALARM N° 17 DESCRIPTION The control unit detects a short circuit to positive on the control line of the Infocenter light indicating low transmission oil pressure ECU RESPONSE. The control unit does not limit the operation of the transmission. CHECK Check that the contacts on connector “ST1” of the Infocenter and on that of the lift control unit, “ECU PS”, are firmly at- tached and not oxidised. With the “ST1” connector unplugged from the Infocenter and the starter key in the “I” (ON) position, connect a test me- ter to pin 5 of connector “ECU PS” and to cab earth, and check that there is no voltage registering (meter reading 0V).

If there is no voltage, fit a new Infocenter. Clear all alarms, turn the starter key first to “O” (OFF) and then back to the “I” (ON) position again, and if the alarm is still present, the transmission control unit must be renewed. 20-90 0.012.8732.4 1 2 5 21 23 45 68 2145 23 68 1 2 5 ECU PS GND4 J2 AS6 3 6 361 ST1 2 7 9 3 12 F35 F27 7.5A 7.5A +15 PRESSURE +30 GND GND BOX GEAR +15 +30 0441.9533 0.012.8894.4 D0017060 0.012.8732.4 1 2 5 21 23 45 68 2145 23 68 1 2 5 ECU PS GND4 J2 AS6 3 6 F35 F27 7.5A 7.5A +15 +30 0441.9533 361 ST1 2 7 9 3 12 +15 PRESSURE +30 GND GND BOX GEAR 0.012.8894.4 21 45 23 68 1 2 5 GND4 J2 3 36 1 2 7 9 3