Deutz — 5.2.4 ANALYSIS OF ALARMS

5. ALARMS 5.2 LIST OF TRANSMISSION CONTROL UNIT ALARMS ALARM N° 97 DESCRIPTION The control unit detects that the transmission ECU software has not been programmed correctly ECU RESPONSE The control unit limits operation to “TC-SHUTDOWN” mode. CHECK Clear all alarms, turn the starter key first to “O” (OFF) and then back to the “I” (ON) position again, and if the alarm is still present, the control unit must be renewed. ALARM N° 98 DESCRIPTION The control unit detects that transmission configuration data have not been programmed correctly. ECU RESPONSE The control unit limits operation to “TC-SHUTDOWN” mode.

CHECK Reprogram the control unit, entering the correct tractor model data, and repeat the calibration procedure for the main clutch and the clutch pedal. Clear all alarms, turn the starter key first to “O” (OFF) and then back to the “I” (ON) position again, and if the alarm is still present, the control unit must be renewed. ALARM N° 99 DESCRIPTION The control unit detects that machine configuration data have not been saved correctly (CHECKSUM ERROR) ECU RESPONSE The control unit limits operation to “TC-SHUTDOWN” mode. CHECK Reprogram the control unit, entering the correct tractor model data, and repeat the calibration procedure for the main clutch and the clutch pedal.

Clear all alarms, turn the starter key first to “O” (OFF) and then back to the “I” (ON) position again, and if the alarm is still present, the control unit must be renewed. 20-135