5. ALARMS 5.3 LIST OF ALARMS DISPLAYED BY SERDIA SERDIA ALARM N° 86 DESCRIPTION The engine control unit detects that its internal temperature is too high. CHECK Turn the starter key to “O” (OFF) and wait a few minutes for the engine to cool down. Turn the key back to “I” (ON) and check that the alarm does not reoccur. If the alarm reoccurs, contact Technical Assistance. SERDIA ALARM N° 87 DESCRIPTION The engine control unit detects that atmospheric pressure is outside the permissible limits. CHECK Turn the starter key to “O” (OFF) and wait a few minutes. Turn the key back to “I” (ON) and check that the alarm does not reoccur. If the alarm reoccurs, contact Technical Assistance.
SERDIA ALARM N° 90 DESCRIPTION The engine control unit has detected a discrepancy between the parameters written in EEPROM. CHECK Check that the parameter values to be written in the control unit EEPROM are correct and consistent with one another. Send the parameters to the control unit again. Turn the starter key first to “O” (OFF) and then back to the “I” (ON) position. If the problem persists, contact Technical Assistance. 20-159