5. ALARMS 5.4 LIST OF FRONT AXLE SUSPENSION CONTROL VALVE ALARMS ALARM N° 16 PW. S. Fa. or NC DESCRIPTION The control unit detects that the power input to the front suspension position sensor is not correct. CHECK With the starter key in the “I” (ON) position, check that the power input to the front suspension position sensor is correct (8 Vdc approx measured between pin 3 (positive) and pin 1 (negative) of connector “X69”) . Turn the starter key first to “O” (OFF) and then back to the “I” (ON) position. See if the alarm is still indicated; if so, the ECU must be renewed.
20-168 0443.7850 14 17 9 20 5 4 17 14 9 JX4 20 4 5 JX3 3 8 FE2 0.012.8732.4 FE1 GND4 J2 4 5 6 1 2 3 X69 U S 0443.7849 7 F17 7.5A +15 0441.9533 D0017240 17 14 9 4 5 6 1 2 3 S 20 4 5 3 8