Deutz — 1.3 STARTING AND TERMINATING OF THE EDS PROGRAM

6. OPERATOR’S MANUAL EDS (Electronic Diagnosis System) 1. GENERAL INTRODUCTION 1.2.4 SOFTWARE INSTALLATION IMPORTANT! The EDS program needs to be installed and executed in the DOS mode of the computer in order to prevent mal- functions! The installation has to be carried out according to the installation instructions included in the scope of supply. The installation procedure valid according to the current release is shown step by step in the subsequent description: Start computer in DOS mode (C:\_) Insert floppy disk in drive A Change to drive A (A:\_) by means of entering A :

and pressing of the ENTER-key The automatic installation procedure is launched by means of entering install Hereby a new subdirectory (C:\EDS) is created on the hard disk in which the EDS program will be installed. During the installation process the user is assisted by instructions on the screen. After succesful installation the EDS program is launched automatically. The program is terminated by selecting Option 8 (C:\EDS_) The subdirectory EDS is quit (C:\_) by means of entering cd. (resp. cd\). 1.3 STARTING AND TERMINATING OF THE EDS PROGRAM IMPORTANT!

If Windows 95/Windows 3.1 is installed as operating system the EDS program needs to be launched in DOS mode (in case of Win’95 via the MS-DOS input prompt icon). Otherwise malfunctions may occur during the diagnosis! 1.3.1 STARTING OF THE EDS PROGRAM Start computer in DOS mode (C:\_) Change into the subdirectory EDS (C:\EDS:>_) by means of entering CD EDS . The program is launched by entering EDS ; the initial menu appears with the following select options: Fig. 1 - Initial Menu Within the initial menu, pressing one of the numerical keys (1 to 7) determines which component (e.g. Agrotronic-hD+ASM) is supposed to be checked and on which computer interface (COM 1 or COM 2) the signals arrive.

20-180