6. EDS (Electronic Diagnosis System) 3. POWER-SHUTTLE DIAGNOSISPROGRAMM DEST 45 Diagnosis > Delete error memory (Cancellazione memoria errori) “Delete error memory” opens a window which prompts the user to confirm the deletion of the error memory. Fig. 26 - Delete error memory Diagnosis > HEX data display This menu item is not relevant for diagnosis, as only internal data in hexadecimal notation are displayed here. On selection of the menu item HEX data display a window appears, in which the user can enter up to four hexadecimal addresses (see figure). In addition to the address data the user has to enter the number of bytes (maximum 12) he wants to read at this start address.
On confirmation with OK their contents are dumped on the screen. Fig. 27 - HEX data display With > / > the start addresses are incremented resp. decremented by one. With > / > the start addresses are increased resp. decreased by 12 (decimal). With > the contents are read continually (default). Selection of this button causes the label to change to ” STAT >>”. Reselection toggles again. Pressing the key ESC (or ALT + C) quits this menu item. 20-188