Deutz — 3.2 DEST 45 PROGRAM DESCRIPTION

6. EDS (Electronic Diagnosis System) 3. POWER-SHUTTLE DIAGNOSISPROGRAMM DEST 45 > Internal variables Upon selecting > a list of the ”internal variables” appears on the right side of the screen together with their values and physical units. All displayed values are calculated by the E-box. Fig. 31 - Internal variables HK pressure Pressure at the main clutch (calculated by means of measuring the current which flows to the pro- portional valve) HK contact pres Contact pressure of the main clutch evaluated during end-of-line programming HK pedal position Position of the clutch pedal (calculated from the voltage level of the angle sensor at the clutch pedal) Diagnosis > Set output ports CAUTION!

Due to safety reasons this menu item can only be selected when the engine has stopped! If the menu item ”End-of-line programming” has been previously executed the ignition on the vehicle needs to be switched off and on again once. Otherwise the digital outputs cannot be activated! Fig. 32 - Select output ports 20-191