6. EDS (Electronic Diagnosis System) 3. POWER-SHUTTLE DIAGNOSISPROGRAMM DEST 45 Determination of the contact pressure of the main clutch In order to insure engaging without a jerk upon automatical reversing, the components transmission control unit (E-box), proportional valve and main clutch are to be coordinated by means of determining the contact pressure. Fig. 40 - Determination of contact pressure CAUTION! As the vehicle starts moving on its own during the process, take care that there is sufficiently free space in front of the tractor! Fig. 41 - Safety note The determination of the contact pressure is started by means of >. For this purpose the followinf works need to be carried out:
Remedy all pending errors at the power-shuttle system Warm up the tractor (transmission oil temperature at least 40 ЧС). Place the tractor on a solid leveled surface and move the drive switch into the neutral position. Let the engine run. Create a safety area with a size of at least 5 meters in front of the tractor which nobody is allowed to enter! Engage the gear (T7100 = 2. Gear; T7200 = 3. Gear). 20-197