6. EDS (Electronic Diagnosis System) 3. POWER-SHUTTLE DIAGNOSISPROGRAMM DEST 45 3.4 DISPLAY POWERSHUTTLE 20-202 Error code Drive program Significance/function 10-20 Normal driving Non-critical error, tractor can be operated normally. Start-up / change of directions possibly delayed or only by jerks. 21 Normal driving Ground speed too high. Reduce ground speed until error code disappears. If the error code is not disappearing contact a DEUTZ-FAHR workshop. 22 Normal driving Transmission oil temperature too high. Reduce tractor load until error code disappears. If the error code is not disappearing contact a DEUTZ-FAHR workshop. 27-41 Limited driving Powershift are blocked.
47-58 Stand-by program (Limp home) Powershifts are blocked. Conditions for starting upon change of directions: Commutator switch at least 1 second in neutral position upon standstill of tractor. 64-70 Emergency program Powershifts are blocked. Driving clutch is not working – driving only possible by means of change of di- rections switch. Commutator switch at least 1 second in neutral position upon standstill of tractor. Contact a DEUTZ-FAHR workshop immediately and have the error be elim- inated. 76-99 No driving possible Contact the DEUTZ-FAHR after-sales service.