Deutz — 3. CALIBRATIONS

ALL ROUND TESTER FOR LIFT AND ASM CONTROL UNIT 3. CALIBRATIONS 5 - EXTDALARM: enabling this option, alarm codes will be displayed in the extended format, i.e. with a different code for each alarm type. Disabling the option, different alarms may be grouped together under a single standard code. (1 - ON: enabled / 0 - OFF: disabled) 6 - SENSITIV.: this options allows the technician to change the response of the draft and wheelslip control functions. Decreasing the value reduces the response speed, whereas if the value is set to 0, the response can be adjusted by way of the rate-of-drop potentiometer. 7 - TRACTOR: this option is used to select the type of tractor. 8 - EXTSENSOR:

this option tells the ECU whether the signal from the external sensor is to be used in the control cycle or to limit the opening of the linkage Up valve. (1 - ON: enables Up valve limiter function / 0 - OFF: enables control by way of external sensor 9 - MIX MODE : allows selection of the MIX potentiometer operating mode. If the function is enabled, the MIX po- tentiometer is used to set the draft/position or draft/po- sition/wheelslip mix. (1 - ON: enabled / 0 - OFF: disabled) Press to quit this menu. E 3.CALIBRATIONS This menu contains all the calibration operations that can be performed when the lift ECU or position sensor is replaced. 1 - MinHeight: calibration of the minimum lift height.

2 - MaxHeight: calibration of maximum lift height. 3 - LockSpeed: ground speed at which the lift lock is applied 4 - Slipage: percentage threshold used to control wheelslip. 5 - Transport: output current from the lift control lever in TRANSPORT position. 6 - Stop: output current from the lift control lever in STOP position. 7 - Control: output current from the lift control lever in CONTROL position. 8 - Float: output current from the lift control lever in FLOAT position. Press to quit this menu. E 20-244 O P T I O N S = = = = = = = = = = = = = = = = 1 - A S M 1 2 - A U T O D R O P 0 3 - 4 W D - 3 0 D E G 0 4 - R O T A T E A L A R M 1 5 - E X T D A L A R M 1 6 - S E N S I T I V .

2 5 5 7 - T R A C T O R 4 8 - E X T S E N S O R 1 9 - M I X M O D E 0 = = = = = = = = = = = = = = = = [ E ] E x i t S E T T I N G M E N U = = = = = = = = = = = = = = = = 1 - M i n H e i g h t 0 . 9 4 2 - M a x H e i g h t 4 . 0 2 3 - L o c k S p e e d 2 0 4 - S l i p a g e % 1 0 - - - M a i n L e v e r - - - 5 - T r a n s p o r t 5 . 3 6 6 - S t o p 3 . 6 6 7 - C o n t r o l 1 . 9 2 8 - F l o a t 1 . 4 5 = = = = = = = = = = = = = = = = [ E ] E x i t