ALL ROUND TESTER FOR LIFT AND ASM CONTROL UNIT 3. CALIBRATIONS 3.1 MINIMUM HEIGHT This menu can be used to set the minimum lift height. PROCEDURE 1 - Start the engine and run on idle 2 - Unlock the lift. 3 - Lower the lift completely using the fender pushbuttons. 4 - Press to confirm the value. E 5 - Press to confirm again, or press to clear. C A 3.2 MAXIMUM HEIGHT This menu can be used to set the maximum lift height. PROCEDURE 1 - Start the engine and run on idle 2 - Unlock the lift 3 - Raise the lift completely using the fender pushbuttons. CAUTION! Carry out these manoeuvres with the engine idling to avoid mechanical damage to the lift.
4 - When the lift has reached maximum height, lower it by 2-3 degrees (approx. 0.2 V). 5 - Press to confirm the value. E 6 - Press to confirm again, or press to clear. C A 20-245 M i n . H e i g h t = = = = = = = = = = = = = = = = A c t u a l : # . # # N e w : # . # # [ A ] C a n c e l [ C ] C o n f i r m M a x . H e i g h t = = = = = = = = = = = = = = = = A c t u a l : # . # # N e w : # . # # [ A ] C a n c e l [ C ] C o n f i r m