Deutz — 7.1 EMR1

SERDIA TASKS 7.1.2 EXAMPLE SPEED DROOP SETTING Proceed as follows: Click on the "Tasks" button. Click on the "Adjusting: Set droop" menu option. The "Droop setting" menu opens. Screen button functions: ECU->PC: Configuration data are read from the control unit and displayed. PC->ECU: Modified configuration data are transferred into the control unit. To store the data permanently, use the "Save in ECU" button. Save in ECU: Configuration data are permanently stored in the control unit. All modifications must be reported back! The reporting procedure is described in Service Announcement 0199-99-9287. Print : Prints the measured values appearing on the screen. Close : Return to the "Tasks" menu.

20-301