Deutz — Tensioning

COMPRESSOR DRIVEBELT COMPRESSOR DRIVEBELT Renewal Remove the key from the ignition and apply the park- ing brake. 1 1 - Loosen the pivot and fixing bolts (1), (2) of the bracket (3) supporting the belt tensioner pulley (4). 2 3 4 F0077870 For models with front PTO only 2 - Loosen and fully unscrew the six bolts (5) (n°6) secur- ing the flange of the cardan shaft (6). 5 8 3 - Detach the flange (7) from the flexible coupling (8). 6 7 F0078012 For all versions 4 - Remove the old drivebelt (9) and fit the new one. 5 - Tension the drivebelt. 9 F0077880 Tensioning Before adjusting the tension, carefully examine the drivebelt for signs of wear.

The belt must be renewed immediately at the first sign of cracking, fraying or separation of the plies. If a new belt is fitted, re-adjust the tension after ap- prox. 15 operating hours. 1 - Remove the right-hand guard (1). 1 F0077891 30-16