COMPRESSOR DRIVEBELT 2 - Loosen the pivot and fixing bolts (2), (3) of the bracket (4) as for the belt renewal procedure. 3 - Tension the drivebelt using a “T” bar and 3/4” exten- sion inserted in the hole in the bracket (4). 3 4 - To tension the drivebelt, turn the bar clockwise and then tighten the bolts (2), (3). 4 2 5 - Check the tension adjustment using the tool and method described in the engine manual. Static deflection immediately after fitting: 550±50 N Static deflection after 15 minutes: 400±50 N F0077903 The check should be carried out with the engine cold. 30-17