Deutz — Refitting

RECEIVER-DRIER RECEIVER-DRIER Removal 2 1 1 - Recover the refrigerant from the system. (For details, see "AIR CONDITIONING SYSTEM - Maintenance"). 2 - Disconnect the connector (1) of the pressure switch (2). F0044150 3 - Disconnect the inlet (4) and outlet (5) pipes from the re- ceiver-drier (3). Plug the ends of the pipes immediately to prevent moisture getting into the system. 1 3 4 4 - Unscrew and remove the bolts(6) securing the bracket (7) and remove the assembly. 5 If a new receiver-drier is to be installed, measure the quantity of oil contained in the old unit in order to de- termine the quantity of oil to be added to the system.

7 6 F0044160 Refitting Refitting is the reverse of removal. 1 Remove the plugs and connect the pipes immediate- ly, fully tightening the fittings, to prevent the entry of moisture. Check the condition of the O-rings and replace them if damaged. 1 - Flush and recharge the system. (For details see "AIR CONDITIONING SYSTEM - Dis- charging, flushing and recharging"). 30-43