Deutz — Refitting

CONDENSER ASSEMBLY CONDENSER ASSEMBLY (The figures depict models with 6-cylinder engines) Removal 4 1 5 Remove the key from the ignition and engage the parking brakes. 1 - Remove the side panels. 2 - Recover the refrigerant from the system. (For details see "AIR CONDITIONING SYSTEM - Discharging, flushing and recharging"). 2 3 - Disconnect the pipes (2) and (3) from the condenser (1). 3 1 Immediately plug the open ends of the pipes to prevent moisture from getting into the system. F0078170 4 - Unscrew the knobs (4) and remove the cowling (5). 1 5 - Remove the bolts (6) (n°4). 6 - Remove the condenser assembly (1). Take care not to damage the fins.

6 Refitting Refitting is the reverse of removal. 1 6 Remove the plugs and connect the pipes imme- diately, fully tightening the fittings, to prevent moisture getting into the system. Check the condition of the O-ring seals and renew them if damaged. F0078180 1 - Flush and recharge the system. (For details see "AIR CONDITIONING SYSTEM - Dis- charging, flushing and recharging"). 30-44