4WD PROPELLER SHAFT 4WD PROPELLER SHAFT Version with front suspension Removal Before switching off the engine, disengage the front suspension by pressing the button in the cab for at least 20 seconds. Remove the key from the ignition and apply the park- ing brake. 1 A 1 - Using suitable lifting equipment, lift the front of the tractor so that the wheels are raised by about 10-12 cm (4-5 in.). 2 - Position a jack “ A “capable of supporting the tractor's weight under the front carrier (1). F0044660 3 - Position under the swinging suspension support (2) a stand “ B “that can be lowered through 10-12 cm (4-5 in.).
2 B F0044670 4 - Discharge the residual pressure from the suspension system by unscrewing the valve (3) two full turns. 3 3 F0078490 5 - Remove the bolts (4) and remove the locating and retaining washers (5) of the tank (6). Mark the washers so as to avoid error when re- fitting the tank. Note the position of the hole “ C ” as the tank is levelled by rotating the front washer. C 5 4 6 F0018637 30-68