Deutz — Refitting

4WD PROPELLER SHAFT 6 - Support the lower guard (9) and remove the bolt (10). 7 - Remove the front bolts and remove the guard (9). 9 10 F0078460 8 - Position a jack “ C ” under the shaft (11) and remove the bolts and self-locking nuts (12) . To enable removal of the upper bolts, turn the wheels by hand. 12 1 11 F0078470 9 - Disconnect the flanges, lower the jack and with- draw the shaft (11) towards the front of the tractor . 2 C 11 F0078482 Refitting Refitting is the reverse of removal. 1 Nuts: 43.5±10% Nm (32±10% lb.ft.) Tighten the nuts in a cross-wise sequence. 2 Rear coupling: Grease 30-67