4WD PROPELLER SHAFT 10 - Remove the front bolts (16) and remove the lower guard (14). 16 16 F0017842 14 11 - Disconnect the pipes (17) of the left-hand suspension cylinder. Plug the ends of the pipes to prevent the entry of contaminants. Loosen the fittings of the flexible hoses by a few turns and, before removing them, push them to detach them from the couplers and thereby dis- charge any residual pressure from the system. 17 17 F0044701 12 - Disconnect the pipes (18) from the right-hand sus- pension cylinder. Label the pipes to avoid confusion on refitting. Plug the pipes and the open fittings to prevent the entry of contaminants. 18 13 - Remove the bracket (19) and remove the pipes.
19 F0044711 14 - Position a jack “ D ” under the shaft (20) and remove the flange bolts and nuts (21). 21 1 In order to remove the upper bolts, lower the jack positioned in step 3. 20 F0078471 30-70