BRAKE MASTER CYLINDERS BRAKE MASTER CYLINDERS Removal Remove the battery cover and disconnect the nega- tive battery lead (–). 1 1 - Remove the console shroud. (For details, see "CEN- TRE CONSOLE AND SHROUD"). 2 - Remove the engine hood and side panels. (For de- tails, see "ENGINE HOOD AND LAMP ASSEM- BLIES"). 3 - Remove the air cleaner. (For details, see "AIR CLEAN- ER"). F0078550 4 - Unplug the connectors (1) of the brake fluid level warn- ing light. 5 - Remove the cap (2) and draw off the fluid contained in the brake fluid reservoir (3). 2 6 - Remove the screws and remove the insulation panel (4).
3 4 F0078500 7 - Disconnect the pipes (5) from the reservoir (3); remove the hood support (6) complete with the reservoir. 3 5 6 F0018762 8 - Disconnect the feed pipes (7) and the by-pass pipe (8) between the cylinders (9). 9 7 8 F0044730 30-72