POWER STEERING UNIT Removal 1 1 - Remove the console shroud. (For details, see "CEN- TRE CONSOLE AND SHROUD"). 2 2 - Mark the hoses (1) and disconnect them from the power steering unit (2). Plug the pipelines and ports to prevent impurities getting in. 1 1 F0078520 3 - Unscrew the retaining bolts (3) and washers (4). 3 4 3 4 F0044790 4 - Remove the power steering unit (2). If necessary, reposition the plate (5) with the rela- tive bushes (6). 2 2 Refitting Refitting is the reverse of removal. 1 F0044800 Pipe fittings: 60 Nm (44.2 lb.ft.) Eye fitting : 29 Nm (21.4 lb.ft.) 2 5 If the fittings have been removed, replace the seals. Torque reassembled fittings to 70 Nm (51.6 lb.ft.).
6 1 - Start the engine, and steer full lock on each side a few times to eliminate any air from the power steering cir- cuit. 2 - Check the fittings and pipelines for leaks. F0044810 30-78