Deutz — Refitting

FRONT PTO ASSEMBLY FRONT PTO ASSEMBLY Removal 1 - Remove the front lift assembly. (For details, see "FRONT LIFT ASSEMBLY") 2 - Unplug the connector (1) and release the wiring from the clip (2). 2 1 F0018080 3 - Fully unscrew the bolts (3) securing the cardan shaft (4) to the flexible coupling (5) and detach the flange. 3 5 4 F0078013 4 - Unscrew the four bolts (6) but only remove the two lower bolts. Leave the two upper bolts in position for safety. 6 1 5 - Fit a non-slip block to a trolley jack; position the non- slip block under the PTO assembly. 6 - Remove the two upper bolts previously left for safety and remove the PTO assembly (7) while supporting the cardan shaft (4).

If neccessary, use a lever to help separate the as- sembly from the tractor. F0018090 PTO: 70 kg (154 lb.) Refitting 7 Refitting is the reverse of removal. 1 Screw: 214 Nm (157.7 lb.ft.) F0018100 30-105