ENGINE MAINTENANCE - Maintenance Procedures Oil Filter Module 4. Remove the O-ring from the screw cap. WARNING Electrical shock hazard: Never discon- nect the battery clamp when the en- gine is running. Disconnecting the bat- tery clamps while the engine is running may result in death, personal injury or equipment damage from electrical arc- ing or damage to electrical compo- nents. WARNING 2 Lubricating oil can cause skin irritation or skin injury. To prevent skin injury, avoid unnecessary contact with the lu- bricating oil. Wear protective clothing, eye wear and gloves when handling lubricating oil. Failure to comply may result in personal injury. 1.
Disconnect the chassis battery cable at the negative battery terminal. 2. Place an oil collection pan directly under the oil filter. 1. Clean the oil filter cap and surrounding area to ensure dirt does not fall into the oil filter module. Centrifugal Bypass Oil Filter Removal Procedure to remove the centrifugal bypass oil filter on PACCAR MX-13 engines. CAUTION Dirt in the engine oil lubrication system can lead to significant damage to the engine. Failure to comply may result in equipment or property damage. Follow the procedure below after reading Oil Filter Removal Preparation. 2. Remove the cap of the centrifugal oil filter.
Use a hexagonal socket or a box wrench to avoid damaging the oil filter cap. 3. Remove the centrifugal filter. Y53-1181-1K1 (08/2018) 53