PACCAR MX-13 — How to Disassemble a CCV

ENGINE MAINTENANCE - Maintenance Procedures 3. Clean the CCV module and surrounding area to avoid dirt contaminating the module. Serviceable CCV - MX-13, Front (not shown). Remove old face gasket. 2 CCV - MX-13 Mounting NOTE Keep the new CCV module in its pack- aging until it's time to install it to the engine. 4. Disconnect the electrical connector and outlet hose. 1 How to Disassemble a CCV Disassembly instructions for servicable Crankcase Ventilation (CCV) modules. Ensure that you have followed these steps How to Remove a Crankcase Ventilation Module on page 55 before proceeding with disassembling the unit.

Follow the steps below to disassemble the CCV to access to the replaceable filter and gaskets. 1. Lay the CCV module on a clean table with the engine interface facing down. 5. Remove the CCV module by unscrewing the six bolts using a ratchet with 13 mm socket. NOTE Be careful when removing the CCV to prevent an oil spill. Oil may be present in the CCV-to-engine interface. 6. Wipe the on-engine sealing interface with a clean, lint-free rag 56 Y53-1181-1K1 (08/2018)