Manual Transmissions and Clutch A correctly adjusted clutch must have about 3/4 inch (19 mm) of travel at the top of its stroke before a stronger resistance can be felt. See Fig. 14.6 . If the free pedal travel is less than this distance, have the clutch adjusted. first or reverse gear from neutral with the clutch pedal fully depressed, the clutch pedal is out of ad- justment or the clutch brake is worn and needs to be replaced. Check the clutch free pedal travel daily and note it in the driver’s report. Lubricating the Clutch Release Bearing NOTICE Failure to lubricate the release bearing and link- age as recommended could result in release bearing and clutch damage.
On vehicles equipped with a greaseable release bearing, the release bearing should be lubricated at regular intervals. See the Western Star Maintenance Manual for intervals and procedures. 02/09/96 f250306 A. Free Pedal Fig. 14.6, Clutch Free Pedal Travel Adjusting the Clutch Clutches have an internal adjustment and external linkage adjustment. See Group 25 of the Western Star Workshop Manual for clutch adjustment proce- dures and specifications. NOTICE Operating the vehicle with the clutch improperly adjusted could result in clutch or clutch brake failure.
Checking the Clutch Brake Operation Clutch brake operation can be felt as an increased resistance as the clutch pedal approaches the bot- tom of its stroke. If the gears grind when shifting into 14.9