Fifth Wheels Coupling, Fontaine and Holland Fifth Wheels 1 NOTE: For a tractor equipped with a Jost fifth wheel, see the heading Coupling, Jost Fifth Wheel below. 2 1. Chock the front and rear trailer tires. 2. Ensure the fifth wheel jaw is fully open and the operating rod is in the unlocked position. See Fig. 17.2 or Fig. 17.3 . 1 3 1 A 2 11/02/2010 f310447 1. Safety Latch 2. Operating Rod (locked) 3. Operating Rod (unlocked) 1 Fig. 17.3, Holland Simplex SE Locking Mechanism D C A 2 10/26/2010 f310110a B NOTE: Make sure the safety latch is down when the control handle is locked. B A. Unlocked B. Locked 1. Safety Latch 2. Lock Control Handle Fig.
17.2, Fontaine Locking Mechanism 10/28/2010 f311124 A. Fifth wheel must lift trailer B. Adjust trailer height C. Ramps tilted down D. 4 to 8 inches 3. Make sure the fifth wheel top plate is tilted so the ramps are as low as possible. 4. Position the tractor so that the center of the fifth wheel is in line with the trailer kingpin. The king- pin should be in a position to enter the throat of the locking mechanism. NOTICE Fig. 17.4, Trailer Connection Point, Standard Fifth Wheel Plate Attempting to couple at the wrong height may cause improper coupling, which could result in damage to the fifth wheel or kingpin. 5. Adjust the trailer height if required. 17.2