Western Star — Western Star (EN)

Brake Systems sized tires could result in a reduced braking force, leading to longer stopping distances. patibility will result in the illumination of the trailer ABS lamp during vehicle start-up and fault detection. See Fig. 12.3 . ABS includes signal-generating tone wheels and sen- sors located in the wheel hubs of each sensed wheel. The sensors transmit vehicle wheel speed information to an electronic control unit (located be- hind the center dash). The control unit’s main circuit interprets the speed sensor signals and calculates wheel speed, wheel retardation, and a vehicle refer- ence speed.

If the calculations indicate wheel lockup, the main circuit signals the appropriate modulator valve to reduce braking pressure. During emergency braking, the modulator valve alternately reduces, in- creases, or maintains air pressure supply in the brake chamber to prevent front and rear wheel lockup. 1 WHEEL SPIN 2 3 07/15/2011 f610752 1. ATC Warning Light 2. Tractor ABS Warning Light 3. Trailer ABS Warning Light The Meritor WABCO ABS combines one front-axle control channel with one rear-axle control channel to form one control circuit. For example, the sensor and modulator valve on the left-front axle form a control circuit with the sensor and modulator valve on the right-rear axle.

If, during vehicle operation, the safety circuit senses a failure in any part of the ABS, the tractor ABS warning lamp illuminates and the control circuit where the failure occurred is switched to nor- mal braking action. The remaining control circuit will retain the ABS effect. Even if the ABS is completely inoperative, normal braking ability is maintained. An exception would be if a modulator valve (or combina- tion modulator valve) is damaged and inoperative. As these components are an integral part of the air brake system, normal braking may be impaired or inoperative. Fig.

12.3, ABS Dash Lights The trailer ABS lamp will not illuminate unless a com- patible trailer is connected to the tractor. The dash- mounted lamp will operate as follows when a com- patible trailer is properly connected to the tractor: When the ignition key is turned to the ON posi- tion, the trailer ABS lamp will illuminate mo- mentarily, then turn off. If the lamp illuminates momentarily during ve- hicle operation, then shuts off, a fault was de- tected and corrected. If the lamp illuminates and stays on during ve- hicle operation, there is a fault with the trailer ABS. Repair the trailer ABS system immedi- ately to ensure full antilock braking capability.

Although the ABS improves vehicle control during emergency braking situations, the driver still has the responsibility to change driving styles depending on existing traffic and road conditions. For example, the ABS cannot prevent an accident if the driver is speeding or following too closely. IMPORTANT: If a compatible trailer is con- nected, and the lamp is not illuminating momen- tarily when the ignition key is turned to the ON position, it is possible that the lamp is burnt out. During emergency or reduced-traction stops, fully depress the brake pedal until the vehicle comes to a safe stop. Do not pump the brake pedal .

With the brake pedal fully depressed, the ABS will control all wheels to provide steering control and a reduced braking distance. Automatic Traction Control Vehicles with electronic engines and ABS may have Automatic Traction Control (ATC). On these vehicles, the ATC system automatically limits wheel spin dur- ing reduced-traction situations. In normal braking ap- plications, the standard air brake system is in effect. ABS, Trailer Compatibility If the vehicle has ATC, there will be a momentary- contact rocker switch on the dash labeled Deep Mud and Snow with an ATC icon. See Fig. 12.4 . Pressing The Meritor WABCO ABS is designed to communi- cate with a trailer ABS, if they are compatible.

Com- 12.4