21. Horn Button (Left-hand Work Lever) Press the lower button on the top of the left-hand work lever (joystick) to sound horn. NOTE: The starter switch must be "ON". Figure 31 FG028598 22. Breaker/Booster Button (Right-hand Work Lever) Press the lower button on the top of the right-hand work lever (joystick) to boost the hydraulic pressure. Refer to the “Boost Mode” on page 3-34. NOTE: This button works with the breaker/boost/shear selector switch. See “9. Intelligent Floating Boom Switch (Optional)” on page 2-11. Figure 32 FG028599 23.
Rotating Switch For a machine equipped with an attachment that rotates, move the thumb wheel switch on top of left-hand work lever (joystick) to rotate the attachment. Rotating switch "UP" is for "CLOCKWISE ROTATION". Rotating switch "DOWN" is for "COUNTERCLOCKWISE ROTATION". FG027215 CAUTION Figure 33 Before using any attachment in a work application, be sure to check its functional control. Make sure that desired movement or action is being activated by the control, e.g. opening/closing, clockwise/counterclockwise, crowd/dump, etc. AVOID INJURY Operating Controls 2-17 DX225LC-3