Communication Indicator Indicates the condition of communication between main controller and display monitor. 1. Normal Condition: The symbol will sequentially move like lightening. NOTE: See Figure 57. 2. Abnormal Condition: If the symbol is not displayed, it means there is a communication error. FG000047 Figure 57 NOTE: See Figure 58. Communication Error Warning If a communication error is generated between EPOS controller and display monitor, this symbol will be displayed. When this symbol is displayed, contact a DOOSAN distributor. NOTE:
When starter switch is turned to "I" (ON) position during a state of communication error failure, the EPOS controller will default to the following modes. FG000048 Figure 58 Power mode: Standard mode Working mode: Digging mode Auto idle: "ON" (Selection state) Engine Speed The engine speed is numerically displayed. FG014225-1 Figure 59 Operating Controls 2-27 DX225LC-3