12. Quick Coupler Release Warning Symbol (Optional) This symbol indicates when the quick coupler is released. WARNING DO NOT OPERATE machine and attachment if AVOID DEATH OR SERIOUS INJURY quick coupler switch is in "I" ( ) position. FG002195 Figure 76 Attachment can fall off causing death or serious injury. 13. Diesel Particulate Filter (DPF) Regeneration Warning Symbol The left-hand regeneration symbol (Figure 77) turns "ON" when forced regeneration is required, or during the manual (forced) regeneration process. When the operator inhibits the regeneration, the symbol will be displayed as shown in the right-hand view (Figure 77). NOTE:
Run machine at "LOW IDLE" and do not stop engine until regeneration cycle is completed. See “Engine Exhaust Emission Control System” on page 3-23 for more information. FG018399 Figure 77 IMPORTANT Move safety lever to "LOCK" position for manual (forced) regeneration. If the equipment is moved or switched off while manual (forced) regeneration, the regeneration will need to be restarted. NOTE: If the machine is moved or switched off during regenerating, the regeneration process will need to be restarted. Operating Controls 2-33 DX225LC-3