Doosan DX225LC-3 — 7. Display Warning Symbols

14. Overload Warning Symbol (Optional) If the overload warning switch is turned "ON", and this symbol appears on the screen and the warning buzzer sounds, that indicates that overloaded condition is occurring. Immediately reduce the load. WARNING AVOID DEATH OR SERIOUS INJURY If this warning appears on the screen and a warning buzzer sounds, reduce the load immediately. FG000253 Figure 78 If you continue to work, tipping of the machine or damage to hydraulic components and structural parts could occur. 15.

Diesel Particulate Filter (DPF) High Temperature Warning Symbol WARNING AVOID DEATH OR SERIOUS INJURY Exhaust gas temperature and exhaust system components are very hot during regeneration. This can cause a fire or burn hazard and result in death or serious injury or damage to property. Keep flammable material and explosive gases away from exhaust system during regeneration. FG018398 Figure 79 This DPF high temperature warning symbol is shown when regeneration is in process. Forced Regeneration - The symbol is amber color. Active Regeneration - The symbol is green color. NOTE: Run machine at "LOW IDLE" and do not stop engine until regeneration cycle is completed.

See “Engine Exhaust Emission Control System” on page 3-23, for more information. DX225LC-3 Operating Controls 2-34