Doosan DX225LC-3 — User Menu - Access and Escape Methods

The camera setting list screen displays various camera states (ON/OFF, NORMAL/MIRROR). Select a camera and click the jog switch to access the relevant camera setting screen. Press the ESC button to return to the previous screen. DIG USB FG018500 Figure 122 On the camera setting screen, set up the camera state (ON/OFF, NORMAL/MIRROR). Also, see the actual image of the currently installed camera. Figure 123 FG018501 If a camera is not installed, the camera image section is shown as a blue screen. If the cursor is placed on "ON/OFF", click on the jog switch to set up "ON" "OFF". Turn the jog switch to locate the cursor at normal/ mirror. Then, click on the jog switch to set up normal mirror.

Figure 124 FG018501 D. Jog Shuttle for Dial The jog shuttle for dial screen provides a method whereby to use the gauge panel's jog switch and control the engine rpm, replacing the engine control dial. From the vehicle configuration, select the jog shuttle for dial to access it. DIG USB Figure 125 FG018502 DX225LC-3 Operating Controls 2-52 PM Camera Setting No 1 Camera - Off / Normal No 2 Camera - On / Normal No 3 Camera - Off / Normal Camera Setting No 1 Camera On Off Normal Mirror Camera Setting No 1 Camera On Off Normal Mirror PM Vehicle Configuration Attachment Select Attachment Setting Camera Setting Jog Shuttle for Dial