Max Flow (ATT)/Min Flow (ATT) The max flow (ATT) /min flow (ATT) can be set up as the max/min flow rate value of the attachment by the user according to the attachment's specifications. For instance, if the relevant attachment's use capacity is 90 - 120 lpm (23.8 - 31.7 gpm), the user can set up 120 lpm (31.7 gpm) for the max. flow rate, and 90 lpm (23.8 gpm) for the min. flow rate. The setup method is the same as the above max. engine limit setup method. The change value by stage in the jog switch operation is 10 lpm (2.6 gpm). User Setting Max Flow Breaker 1 Setting The user setting max flow is designed to set up the flow rate segment of the attachment to be used by the user.
Within the above setup max. flow rate (pump), max. flow rate (ATT), and min. flow rate (ATT) scope, the user can set up the max. flow rate value of the attachment to be used. The setup method is the same as the above max. engine limit setup method. The change value by stage in the jog switch operation is 10 lpm (2.6 gpm). FG018498 Figure 120 When setting up all above items, the setup limits are outlined as follows. If these limits are exceeded, a pop-up window is displayed for 3 seconds, saying "You can set value in limit range!". C. Camera Setting The camera setting screen is designed to set up various cameras "ON/OFF" and normal/mirror.
Vehicle Configuration From the vehicle configuration, select camera setting to access the camera setting list screen. Attachment Select Attachment Setting Camera Setting Jog Shuttle for Dial s DIG ISO USB FG018499 Figure 121 Operating Controls 2-51 DX225LC-3 ttachment Use Button Type ax E/G Limit Max E/G Limit ax Flow(Pump) Max Flow(Pump) You Pump Option can set value in 2 Pump Option limit range! User Setting M ax Flow Max. Limit Min. Limit Max E/G Limit 1,500 rpm 1,000 rpm Max Flow (Pump) Conforms to the max. engine limit Conforms to the max. engine limit Max Flow (ATT) 1,000 lpm (264.2 gpm) Min. flow rate (ATT) + 10 lpm (2.6 gpm) Min Flow (ATT) 40 lpm (10.6 gpm) Of the max.
flow rate (pump/ATT), the smaller value - 10 lpm (2.6 gpm)