Doosan DX225LC-3 — 2. Adjusting Height of Seat and Depth of Cushion

SEAT ADJUSTMENT WARNING AVOID DEATH OR SERIOUS INJURY Adjust the seat position before starting operation or after changing the operator. Do not adjust the seat position while the machine is moving because a loss of control can occur. Always stop the machine, apply the parking brake, and then adjust the seat. Always fasten your seat belt while operating machine. Adjust the seat so the control levers and pedals can be operated freely and easily with the operator’s back against the backrest. 1. Forward/Backward Adjustment Holding lever (1, Figure 226), raise it up, move the seat to the desired position. Release lever to lock the seat in the selected position.

Adjustment range is 180 mm (7.1 in). 3 4 2. Adjusting Height of Seat and Depth of Cushion 1 Forward Tilt Press the adjustment lever (3, Figure 226) to adjust the seat cushion angle. (0"/+4"/+8") A 2 FG018572 Press the adjustment lever (4, Figure 226), and adjust the seat cushion forward/backward by max. 50 mm, to fit with the length of the operator's thigh. Cushion Slide Figure 226 Seat Height It is possible to move the seat up or down by combining adjustments forward and rear tilt. Height adjustment is 60 mm (2.4 in). Adjust height of seat by moving adjustment lever (2, Figure 226) up or down.

Seat height can be adjusted by referring to the weight indication window (A, Figure 226) on the right. Green: Standard weight Red: Underweight or overweight Operating Controls 2-83 DX225LC-3